Factory I/O is a very popular 3D factory simulation software for learning and practicing PLC, SCADA, HMI, and industrial automation. You can build a virtual production line and then control it using a real PLC or a simulated PLC.
Factory I/O supports connections with:
+ Siemens S7-1200, S7-1200 G2 (New), S7-1500 PLCs
+ PLCSIM
+ Allen-Bradley
+ CODESYS
+ Modbus TCP
+ OPC UA
+ Arduino, ESP32 and many other SoftPLCs
Installation Instructions
+ Step.1: Download the software and extract it using the password: plctop.com
+ Step.2: Run file “Step1_FactoryIO-Installer-2.5.10.exe” for Start Setup
+ Step.3: Keep click Next until the installation is complete.
+ Step.4: Go to the “Step2 – Active File” folder > Copy Factory IO_2.5.10_Patch_ BcgTeam
+ Step.5: Go to the Factory IO software installation folder.
+ Step.6: Paste File Factory IO_2.5.10_Patch_ BcgTeam
+ Step.7: Run File Factory IO_2.5.10_Patch_ BcgTeam
+ Step.8: Displaying as shown below indicates success.
Enjoy
Software Download (GoogleDrive)
>>> Download Factory-IO V2.5.10 Full Active Software
Password Extract: plctop.com
If you encounter any problems during the download of Factory IO V2.5.10 software or software installation, please comment below the article. Please like, and share if it helps
Thanks for reading
